Evolution Express Advanced 5A/8A Starter Set with DT602 – #245-EVOX




Evolution Express Set Includes:

DCS210+ Command Station/Booster With Intelligent AutoReverse

DT602 Super LocoNet Throttle

UP5 Universal Panel

PS615 Power Supply

Evolution Express Manual

The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers

Works with compatible LocoNet systems

Color 2.4” LCD Display Screen

Advanced menu system and displays

Built-in scrolling help and prompting

Soft ON/OFF switch, with zero OFF power-drain

Advanced display Power Saving for longer wireless battery operation

No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!

Can use recharged AA batteries

Available in standard tethered or Radio Duplex

Duplex Scan for available Networks and radio signal strength. Run without cords!

All throttles come with a LocoNet cord that can be unplugged, and is replaceable

Dual throttle controls let you control two locos simultaneously

Run locomotives with “encoder click” knobs for both speed and direction control

Full numeric keypad makes loco selection simple

Control light and sound effects functions with the press of a button

Control 29 functions (F0-F28).

Function active/inactive indicators

Convenient step-by-step throttle option set up

Supports simplified decoder programming

Simplified 2 or 4 digit addressing setup

Over 9,000 locomotive decoder addresses

Supports turnout and stationary decoder control

Over 2000 turnout decoder addresses

Fast clock display

Recall feature

Advanced Route editor

USB Interface

Big System Capacity for Big Layouts

Run up to 100 addresses at the same time on your system.

Run up to 100 throttles at the same time on your system.

Over 9000 Locomotive Addresses

Address 00 for operation of one loco or MU consist without decoders

Two Digit Addressing is easy to use. (Address 01-127)

Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)

5 or 8 Amps of Power to Run More Trains

Selectable Scale Voltage for Safe Operation in ALL Scales

Customizable Voltage Settings

5 amps of power with included PS615 power supply

8 amps with PS2012E power supply (sold separately)

Function Control

Control 29 functions (F0-F28).

Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).

Two DCC Outputs are Better than One!

Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!

Use one output for a braking section while the other runs the layout.

Decoder Programming

Built in read/write programmer lets you program and read back CV values.

Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming


Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.

Advanced consisting and Basic consisting, too!

Nested consisting where consists can be consisted together.

Stationary Decoders, Turnout Control & Turnout Position Reporting

Access to stationary decoder control for turnouts and other devices.

DT602 reports turnout position based on last command sent.

Control 2000+ stationary decoder addresses.


Turnout List/Route capability to simplify complex yard operations.

EZ routes button for simplified Command Station route programming

Customizable System Options

Turn audible warnings on or off.

Set up purging options.

Multi-format command station mode.

Loco Reset button for easy system purging

UP5 Universal Panel

Makes LocoNet hook up simple!

2 LocoNet jacks for hooking up your LocoNet network.

3 throttle jacks for hooking up throttles and other non-RailSync devices.


Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.

With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.

DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface!

Other Advanced Features

IPL updatable firmware for continued product improvements

Device Query and Device Statistics to help with troubleshooting

Input Mode to help set up detection on your layout

Uses Expanded slots